Toy Hauler Fuel Pump GPI EZ8-RV 12 Volt Replacement On The Go Fueling.

(We do not offer shipping to Canada) ( Pump Only)

Features:

• Great Plains Industries, INC EZ-8RV Fuel Pump

• The ez8rv pump is not intended to be used with an automatic nozzle.

• EZ8RV Fuel Pumps For Toy Haulers On The Go Fueling is designed for use only with gasoline (up to 15% alcohol blends such as E15), diesel fuel (up to 20% biodiesel blends such as B20) and kerosene.

• DO NOT use this ez8rv pump for dispensing any fluids other than those for which it was designed. To do so may damage pump components and will void the warranty.

• Ez8rv Designed to operate on a typical 12-volt DC automotive electrical system.

• This pump is designed to self-prime with dry gears.

• You can wire a switch on the power line, but there is no switch on this model of pump.

 Please allow 4-5 days for shipping (We do not offer ship to Canada)Toy Hauler Fuel Pump GPI EZ8-RV 12 Volt Replacement On The Go Fueling Specifications:

• Do not leave the ez8rv system running without fluid.
• “Dry running” can damage the ez8rv pump. If the system fails to deliver fuel after 15 to 20 seconds, turn the system off and refer to the Troubleshooting Section in manual.
• Do not pump the tank completely dry, as contaminants from the bottom of the tank may enter the pump.
• Excessive motor heat can trip the device. It resets automatically after the motor has cooled.
• Make sure all threaded ez8rv fuel connections are wrapped with three to four turns of Teflon tape or pipe thread sealant approved for use with petroleum fuels.
• Clean the tank interior of all dirt and debris. Make sure the tank is vented. A vent cap rated at 3 psi or less is recommended.
• Suction line design and size is important for optimum pump performance. GPI requires suction line to be 3/8″ minimum diameter.
• EZ8RV Fuel Pumps For Toy Haulers On The Go Fueling must be mounted within the clearance lines of the vehicle and ptorected from road impact damage.
• A grounding connection is provided. It is identified as a green colored binding head screw in the electrical cavity. Connect these ez8rv pumps only to a 12- volt DC power supply. DO NOT attempt connection to a 24-volt DC, 115-volt AC or 230 volt AC power source.
• For installation in unclassified ares a flexible power cord, fuse and strain relief grip should be used.
• NOTE:These ez8rv components have NOT been evaluated as part of the UL Listed Equipment and are not intended for use in a Hazardous (Classified) Location. Customer is responsible for return shipping.There will be a 20% restocking fee on all returned orders.

Ez8rv fuel pump not working  

SWITCH MODEL EZ-8RVS Great Plains Industries

Fuel Transfer Pump GPI